Compare Hyperbaric Oxygen Chambers
Every model in the Nordic Welltech range, side by side. All figures below are taken directly from the manufacturer specification sheets.
MONOPLACE – single person
| Model | Seats | Pressure | Outer L x W x H | Internal volume | Weight | Min. floor area |
|---|---|---|---|---|---|---|
| Zeugma | 1 | 2.0 – 2.4 ATA | 1988 x 1368 x 1858 mm | 1.9 m³ | 750 kg | 5500 x 2800 mm |
MULTIPLACE – two to four seats
| Model | Seats | Pressure | Outer L x W x H | Internal volume | Weight | Min. floor area |
|---|---|---|---|---|---|---|
| Panorama | 2 | 2.0 – 2.4 ATA | 1987 x 1344 x 1858 mm | 1.9 m³ | 750 kg | Not published by the manufacturer; same outer footprint as Zeugma |
| Atlantis | 2 | 2.0 – 2.4 ATA | 2151 x 2000 x 1859 mm | 3.8 m³ | 1050 kg | 4400 x 3000 mm |
| Mediterranean | 4 | 2.0 – 2.4 ATA | 2926 x 1910 x 1860 mm | 5.8 m³ | 1250 kg | 6000 x 3500 mm |
| Giza | 4 | 2.0 – 2.4 ATA | 2926 x 1848 x 1860 mm | 5.8 m³ | 1250 kg | 6000 x 3500 mm |
MEDICAL MULTIPLACE – hospital and clinical use
| Model | Seats | Pressure | Outer L x W x H | Internal diameter | Material | Min. floor area |
|---|---|---|---|---|---|---|
| Titan | 4+2 to 12+2, up to 14 | 3.0 – 6.0 ATA | 7988 x 2356 x 2604 mm | 2200 mm | Steel | 13000 x 6000 mm chamber room, plus 9000 x 6200 mm plant room |
Reading the table. Every chamber ships as modules that pass through a standard doorway, so no structural work is needed to get the vessel into the room. Maximum occupant weight is 225 kg on all models. Zeugma is supplied in aerospace aluminium for the 2.0 ATA version and steel for the 2.4 ATA version; Panorama is ballistic steel; Atlantis, Mediterranean and Giza are aerospace aluminium; Titan is steel. Emergency decompression is 2.0 to 1.0 ATA in 90 seconds on the wellness chambers and 3.0 to 1.0 ATA in 125 seconds on Titan.
Plant room. Each chamber runs on a 4 hp air compressor (564 LPM, 1-8 bar), one 2500 W oxygen concentrator per seat (90-93 percent purity, 1-20 LPM), a 1500 W air cooler holding 5-40 °C to within ±0.1 °C, and a refrigerated air dryer. Budget the electrical supply for that load, not for a domestic socket.
Certification. ASME PVHO, PED, CE under 93/42/EEC, machinery directive 2006/42/EC, UKCA, NFPA, and manufacturing under ISO 13485, ISO 9001, ISO 45001, ISO 14001 and ISO 27001.